DR-60
ENGELEC
DR-60
Size: | |
---|---|
Availability: | |
DIN Rail Mounted Power Supply DR-60
Features:
Isolation Class II
Protection: Short circuit, Overload, Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
CE (EMC LVD) RoHS certified
2 years warranty
Specification:
Model | DR-60-5 | DR-60-12 | DR-60-15 | DR-60-24 | |
OUTPUT | DC Voltage | 5V | 12V | 15V | 24V |
Rated Current | 6.5A | 4.5A | 4A | 2.5A | |
Current Range | 0-6.5A | 0-4.5A | 0-4A | 0-2.5A | |
Rated Power | 32.5W | 54W | 60W | 60W | |
Ripple & Noise (max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |
Voltage Adj. Range | 4.75 ~ 5.5V | 11.1 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 26.4V | |
Voltage Tolerance Note.3 | ±2% | ±1% | ±1% | ±1% | |
LINE REGULATION | ±1% | ±1% | ±1% | ±1% | |
LOAD REGULATION | ±1% | ±1% | ±1% | ±1% | |
Setup, Rise Time | 100ms, 30ms/230VAC 200ms, 30ms/115VAC at full load | ||||
Hold Up Time | 100ms/230VAC 23ms/115VAC at full load | ||||
INPUT | Voltage Range | 85~264VAC 124~370VDC | |||
FREQUENCY RANGE | 47~63Hz | ||||
AC Current | 1.2A/115VAC 0.8A/230VAC | ||||
Efficiency | 76% | 82% | 83% | 84% | |
Inrush Current | COLD START 18A/115VAC 36A/230VAC | ||||
PROTECTION | Over Load | 105%~160% rated output power | |||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||
Over Voltage | 5.75 ~ 6.9V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | |
Protection type : Shut down o/p voltage, re-power on to recover | |||||
ENVIRONMENT | Working Temp., | -20°C~+60°C; (Refer to "Derating Curve") | |||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||
Storage Temp., Humidity | -40°C~+85°C; 10%~95%RH | ||||
Temp. Coefficient | ±0.03%/°C(0~50°C) | ||||
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||||
SAFETY | Withstand Voltage | I/P-O/P:3KVAC | |||
Isolation Resistance | I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH | ||||
EMC EMISSION | Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3 | ||||
EMC IMMUNITY | Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A | ||||
OTHERS | MTBF | 216.2K hrs min. MIL-HDBK-217F (25°C ) | |||
DIMENSION | 78*93*56mm (W*H*D) |
DIN Rail Mounted Power Supply DR-60
Features:
Isolation Class II
Protection: Short circuit, Overload, Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
CE (EMC LVD) RoHS certified
2 years warranty
Specification:
Model | DR-60-5 | DR-60-12 | DR-60-15 | DR-60-24 | |
OUTPUT | DC Voltage | 5V | 12V | 15V | 24V |
Rated Current | 6.5A | 4.5A | 4A | 2.5A | |
Current Range | 0-6.5A | 0-4.5A | 0-4A | 0-2.5A | |
Rated Power | 32.5W | 54W | 60W | 60W | |
Ripple & Noise (max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |
Voltage Adj. Range | 4.75 ~ 5.5V | 11.1 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 26.4V | |
Voltage Tolerance Note.3 | ±2% | ±1% | ±1% | ±1% | |
LINE REGULATION | ±1% | ±1% | ±1% | ±1% | |
LOAD REGULATION | ±1% | ±1% | ±1% | ±1% | |
Setup, Rise Time | 100ms, 30ms/230VAC 200ms, 30ms/115VAC at full load | ||||
Hold Up Time | 100ms/230VAC 23ms/115VAC at full load | ||||
INPUT | Voltage Range | 85~264VAC 124~370VDC | |||
FREQUENCY RANGE | 47~63Hz | ||||
AC Current | 1.2A/115VAC 0.8A/230VAC | ||||
Efficiency | 76% | 82% | 83% | 84% | |
Inrush Current | COLD START 18A/115VAC 36A/230VAC | ||||
PROTECTION | Over Load | 105%~160% rated output power | |||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||
Over Voltage | 5.75 ~ 6.9V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | |
Protection type : Shut down o/p voltage, re-power on to recover | |||||
ENVIRONMENT | Working Temp., | -20°C~+60°C; (Refer to "Derating Curve") | |||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||
Storage Temp., Humidity | -40°C~+85°C; 10%~95%RH | ||||
Temp. Coefficient | ±0.03%/°C(0~50°C) | ||||
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||||
SAFETY | Withstand Voltage | I/P-O/P:3KVAC | |||
Isolation Resistance | I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH | ||||
EMC EMISSION | Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3 | ||||
EMC IMMUNITY | Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A | ||||
OTHERS | MTBF | 216.2K hrs min. MIL-HDBK-217F (25°C ) | |||
DIMENSION | 78*93*56mm (W*H*D) |