ENGELEC MAL aluminum alloy mini cylinder pneumatic
Ordering code
MAL | CM | 32x50 | B | FA |
- | - |
Serial code | Back cover type | Inner bore*Stroke | Magnet code | Fixed type |
MAL:Standard double acting |
|
|
|
Blank: Swing tail | Blank: no magnet | FA: front cover fixed |
MALD: Double-axis double-acting type | CM: Round tail type | S: with magnet | FB: fixed rear cover |
MALJ: Double-axis adjustable double-acting type | U: Flat tail type |
| LB: Tripod |
Bore size(mm) | 16 | 20 | 25 | 32 | 40 | 50 | 63 |
Acting type | MSA/MTA | Single acting | - |
MA/MAD/MAJ | Double acting | - |
MAR | - | Double acting |
MAC/MACD/MACJ | - | Double acting with cushion |
Fluid | Air(to be filtered by 40 um filter element) |
Operating pressure | Double acting | 0.15~1.0MPa(22-~145psi)(1.5~10.0bar) |
Single acting | 0.2~1.0MPa(28-~145psi)(2.0~10.0bar) |
Proof pressure | 1. 5MPA(215psi)(15bar) |
Temperature℃ | -20~70 |
Speed range mm/s | Double acting:30~800 Single acting:50~800 |
Stroke tolerance | 0~150 >150 |
Cushion type | MAC/MACD/MACJ Series: Variable cushion; Other series: Bumper |
Port size [Note 1] | M5*0.8 | 1/8" | 1/4" |
Series | I.D. (mm) | Thread | Port size | Standard stroke (mm) | Max. Stroke (mm) | Permissible stroke (mm) |
MAL | 20 | M8*1.25 | PT1/8 | 25 50 75 80 100 125 150 160 175 200 250 300 | 500 | 800 |
25 | M10*1.25 | 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 | 800 | 1200 |
32 | 800 | 1200 |
40 | M12*1.25 | 1200 | 1500 |
MSAL | 20 | M8*1.25 | PT1/8 | 25 50 75 80 100 125 150 | 150 | - |
25 | M10*1.25 | 150 | - |
32 | 150 | - |
40 | M12*1.25 | 150 | - |
MTAL | 20 | M8*1.25 | PT1/8 | 25 50 75 80 100 | 100 | - |
25 | M10*1.25 | 100 | - |
32 | 100 | - |
40 | M12*1.25 | 100 | - |
MALDMALJ | 20 | M8*1.25 | PT1/8 | 25 50 75 80 100 125 150 160 175 200 | 200 | 300 |
25 | M10*1.25 | 25 50 75 80 100 125 150 160 175 200 250 | 250 | 300 |
32 | 250 | 300 |
40 | M12*1.25 | PT1/4 | 250 | 300 |