DIN Rail Mounted Power Supply DR-45

Name: DIN Rail Mounted Power Supply DR-45
Brand: ENGELEC
SKU: 42232177
Rating: 5.0 (51 reviews)

Inquire

Product Description

DIN Rail Mounted Power Supply DR-45

Features:

Isolation Class II

Protection: Short circuit, Overload, Over voltage

Cooling by free air convection

Can be installed on DIN rail TS-35/7.5 or 15

LED indicator for power on

100% full load burn-in test

CE (EMC LVD) RoHS certified

2 years warranty

Specification:

Model		DR-45-5	DR-45-12	DR-45-15	DR-45-24
OUTPUT	DC Voltage	5V	12V	15V	24V
	Rated Current	5A	3.5A	2.8A	2A
	Current Range	0-5A	0-3.5A	0-2.8A	0-2A
	Rated Power	25W	42W	42W	48W
	Ripple & Noise (max.) Note.2	100mVp-p	200mVp-p	240mVp-p	480mVp-p
	Efficiency	72%	77%	77%	80%
	Voltage Tolerance Note.3	±2%	±1%	±1%	±1%
	LINE REGULATION	±1%	±1%	±1%	±1%
	LOAD REGULATION	±1%	±1%	±1%	±1%
	Setup, Rise Time	800ms,60ms/230VAC at full load
	Hold Up Time	100ms/230VAC at full load
INPUT	Voltage Range	90~264VAC 120~370VDC
	FREQUENCY RANGE	47~63Hz
	AC Current	1.5A/115V 0.75A/230V
	Inrush Current	Cold start 28A/115V 56A/230V
PROTECTION	Over Load	105%~150% rated output power
	Over Load	Protection type: Constant current limiting, recovers automatically after fault condition is removed
		Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	Working Temp.,	-20°C~+60°C; (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	Storage Temp., Humidity	-40°C~+85°C; 10%~95%RH
	Temp. Coefficient	±0.03%/°C(0~50°C)
	Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY	Withstand Voltage	I/P-O/P: 3KVAC
	Isolation Resistance	I/P-O/P: 100M Ohms / 500VDC
	EMC EMISSION	Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
OTHERS	MTBF	441.5K hrs min. MIL-HDBK-217F (25°C)
OTHERS	DIMENSION	937867mm (LWH)
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

DIN Rail Mounted Power Supply DR-45

Product Description

Related Products